Products
Downloads:
CG3110M Chipset Brief (Chinese)
Ethernet Over Coax Evaluation Platform
Ethernet Over Coax Evaluation Platform (Chinese)
CG3110M System-on-Chip Solution
The CG3110M chipset is a system-on-chip solution for providing Triple-Play (video, voice,
data) services to individual apartments in Multi-Dwelling Units (MDU). The CG3110M chipset can easily be integrated into Optical Network Terminal (ONT) and DSL gateway equipment as well as enable the design of low cost Ethernet bridge endpoint devices for installation in the individual apartments. This allows the WAN access network’s bandwidth to be shared among the building’s apartment units.
The CG3110M is optimized for low-cost, easy to install MDU/MTU systems. CG3110M MDU based solution coexists with standard cable TV broadcast services already delivered over those same wires.
CG3110M MDU solution is based on the widely-deployed HomePNA (ITU G.9954) industry standard and delivers enhanced physical layer transmission for robust operation over the challenging noisy infrastructure typically found in older apartment buildings. It brings the benefits of CopperGate’s field-proved Home Networking IPTV solution to the MDU Access application including high data rates, multi-band operation, advanced synchronous MAC and best of breed QoS. The solution adds many new MDU-specific features, such as advanced point-to-multipoint MAC operation, support of large numbers of End-Points per Master device, client to client privacy, remote configuration of clients according to their Service Level Agreement, users’ admission control, remote management and diagnostics and more, making it very attractive to service providers worldwide.
The CG3110M comprises of the CG3111 MAC + PHY digital engine and the CG3112 analog front end.
CG3110M Features:
- Robust operation above 55db (over 1,000 meters) end-to-end attenuation
- 160Mbps data rate per band
- Point-to multipoint topology; up to 31 end-points per Master
- Coexists with broadcast CATV
- Advanced synchronous, CSMA/CA MAC protocol
- Low latency and jitter
- Advanced guaranteed and prioritized QoS
- Efficient supports of broadcast, multicast, unicast and VLAN routing schemes
- Absolute client to client privacy
- Supports AES based encryption
- Dynamic configuration of clients according to Service Level Agreement
- Local & remote network monitoring and logging tools
- Same chipset for Master and End Point design
- Built-in MII/RMII/SMII/SSSMII PHY host interfaces
- Built-in 100 Base-T Ethernet MAC
- Industrial temperature range
CG3110M Development Kit
Ethernet-over-Coax Evaluation Platform (CG3110MEVP)
CopperGate’s MDU evaluation platform is a ready-to-install Ethernet-over-Coax system that enables service providers and equipment vendors to test the performance of the CopperStream MDU Access solution in real-life environment. The platform comprises one EoC Master Bridge and multiple MDU Client Bridges. The platform comes equipped with comprehensive set of management, diagnostic, noise measurement and logging tools.
Each of the EoC Bridges also serves as reference to equipment vendors’ designs and as Golden Node in design verification.
MDU Solution Hardware Reference Design Package (CG3110MHRD)
CopperGate offers complete design files for the CG3110M MDU Master and Client. The package includes design files of stand-alone EoC Bridges (for Master and Client designs) as well as an embedded design for integration into WAN termination equipment such as ONTs. The typical hardware design package includes schematics, bill of materials (BOM), layout and assembly files, documentation and supporting application notes.
MDU Software Development Kit (CG3110MSDK)
The MDU software development kit enables rapid integration of the CopperStream firnware into equipment vendors’ designs. It provides a development environment with high-level APIs and code samples for developing management applications. It can also be used for building
offline production tools. The software development kit includes a development library, sample applications and documentation.